Connecting to the Management Web Interface

Before proceeding:

Please ensure you have completed the previous step: Configuring the Network Management Interface

Your Virtual appliance should now be connected to the network and you have been able to verify connectivity with a network PING.

Connect to the Management Interface: Now you are ready to connect to the Management Web Interface.  Open your browser and connect to https://<ip-address> , where <ip-address> is the IP address you allocated to the EasySBC.

Important: You will see a Certificate Exception message like below:

Internet Explorer



 Accept the exception and continue, you will be presented with the EasySBC login screen:


You are now ready to Login and configure your EasySBC.  The default Username/Password is admin/admin.

Information on Configuring your EasySBC can be found here: Configuring the EasySBC  


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk